Our Power Saver uses a capacitor system to stabilize the flow of electricity. It reduces the spikes in the supply, protecting against surges. The system improves the power factor of your electricity and reduces your electricity bill by on average 15%.

One Power Saver will work on the whole circuit in your building. Our field testing for a typical home consistently shows that the Power Saver will save 3 to 7 kw per day, based on electrical consumption of 30 kw per day. The amount of savings depends on a few factors, such as the types of electrical appliances, the time they are in use and the location. Places near to shops, restaurants and light industries, where the voltage supply is unstable and fluctuating will see higher savings. Where voltage supply is particularly unstable, the Power Saver can reduce consumption by 30% or more. Simply plug it into any wall outlet and switch it on to work.

The Power Saver reduces the reactive power generated by inductive loads. This improves safety by reducing the overheating of electrical wiring. It also extends the life span of your electrical appliances. Power Save is made in US with German technology, and has been tested by PSB (Singapore) and checked for compliance with EU standards.

Installation

• Locate the circuit Breaker (consumer Unit) in your house
• Find a 13 amp outlet which is the nearest to the Circuit Breaker (Consumer Unit)
• Plug the electric saver into the 13 amp outlet and switch on the unit.

Appliance

Single phase Just plug into any 13 amp outlet and switch on the unit.

Three-phase 3 separate units are required for each phase, please refer the installation to a qualified electrician

Precaution

• The power point socket should be in good condition, not shaking or loose.
• Contact should be avoided when the power is switched on.
• The device can store electrical charge, wait for 10 seconds after the electrical supply is switched off before unplugging the socket.
• Do not use on multi-purpose socket, it must be a stand alone plug in.
• Always refer the installation to a qualified electrician.

Usage Recommendations

Recommended for monthly electricity (kWH / unit)